Description TRI-GEL is a water based damp-proofing treatment for walls affected by rising dampness. TRI-GEL is injected into the mortar bed between bricks, stones or blocks via horizontally drilled holes to form a continuous barrier to the passage of moisture from the ground. The UNIQUE formulation allows faster injection without the need for electric d.p.c. pumps. Being water based and water soluble, TRI-GEL is able to diffuse naturally into damp substrates. After injection, TRI-GEL reacts to form a water-repellent Silicone resin network within the capillaries of the substrate. This network is permeable to water vapour which means that the walls can “breathe” and dry out naturally. TRI-GEL is injected into 12mm diameter holes; drilled horizontally into the chosen mortar bed at 100-120mm centres or at the perp joint, mortar bed junction (brickwork). See below:
Tri-Gel drilling pattern
Key Benefits TOTAL DISPERSION IN DAMP/WET SUBSTRATES LOW ODOUR USES TIME-PROVEN ACTIVE INGREDIENT NO HYDROCARBON SOLVENT THIXOTROPIC FOR EASY INJECTION NOT RELIANT ON SUBSTRATE ALKALINITY FOR EFFECTIVE CURING

Approved Installation Contractor h Wall Ties h Damp Proofing h Timber Preservation h Specialist Cellar Conversions h Brick and Masonry Sealing

Last modified: 02/16/08