Clear Roof Sealer
Smartseal roof sealer creates a water repellent barrier and protects against re-growth of moss and algae.
The roof tile sealer is a high quality, clear, solvent free acrylic impregnating roof sealer for concrete, clay or slate tile roofs. Once applied, the roof sealer will alter the chemical structure of any roof tile and provide an excellent water repellent surface. The clear roof sealer will also greatly restrict the growth of algae, lichen and moss to the surface of the tile.
Roof Tile Sealer features:
- Suitable for slate, clay tiles and concrete tiles
- 1 x 25 litre will treat up to 125 m2 on concrete roof tiles & 200-250 m2 on clay & slate roof tiles
- Highly resistant to water, staining and organic growth
- Will not change appearance of roof tile
- One-coat to saturation (with 2nd lighter coat)
- Average coverage 5 m² per litre
- Application by sprayer or brush
- Touch dry 2-3 hours
- Fully waterproof 24 hours
- Lifespan up to 10 years
- Solvent free impregnating sealer
Dimensions:
-
5 Litre: 15 x 20 x 26cm
-
2 X 5 Litre: 30 x 20 x 26cm
-
3 X 5 Litre: 30 x 40 x 26cm
-
25 Litre: 23 x 30 x 46cm
Technical
PREPARATION
- Before application of roof sealer make sure tiles or slates are totally clean, dry and free from moss or algae spores.
- Unless applied to a new roof, pressure washing and application of suitable biocide is essential.
APPLICATION: Apply roof sealer by hand held sprayer or brush, apply to saturation, it is recommended that after around 20 - 30 minutes a light second 'wet on wet' coat is applied. Not to be applied if there's a threat of rain or temperatures below 12°C. Apply to test area first, mix container before use.
Clean equipment with water immediately after use.
SHELF LIFE: Use as soon as possible after opening. Store away from sun and sources of heat. Avoid frost and low temperatures.
Can be stored for 12 months (in original sealed container).
